Description
Overview
Some kitchen taps come with a thread that does not match the diverter on a benchtop water filter. This 24mm male tap adapter is made to bridge that gap, giving you a clean, secure connection without calling in a plumber. It screws straight onto a faucet with a 24mm external thread and lets the diverter valve fit properly. Solid and simple, it is the quick fix that keeps your benchtop filter running without leaks.
Key Features
-
Built with a 24mm male thread (15/16"), designed to match standard diverter valve fittings used with benchtop filters.
-
Installs by hand with no tools needed, making it a straightforward DIY job in minutes.
-
Constructed from durable brass or chrome-plated brass that resists corrosion and holds pressure well.
-
Compact shape means it does not bulk up the tap or interfere with everyday use.
-
Designed specifically for benchtop water filter diverters, ensuring a tight and reliable seal.
Where to Use It
This adapter is made for kitchens where the faucet has a 24mm external thread, but the filter diverter expects a female connection. It is commonly needed in rental homes, where a permanent filter system is not an option, or when setting up a temporary benchtop filter during travel or short stays. Most mixer taps and single-lever kitchen faucets with a male-threaded aerator are a match for this adapter.
How to Check if It Fits Your Tap
-
Unscrew the aerator at the end of your kitchen faucet.
-
Look for the thread. If it is on the outside and measures 24mm across, this is the adapter you need.
-
If the thread is on the inside (female), then you probably do not need this piece.
-
If it is another size such as 22mm or 28mm, this adapter will not fit.
Still not sure? A quick check with a ruler or calliper across the thread from edge to edge will confirm it.
Why This Matters
When a diverter valve does not connect properly, the result is usually a leak, a poor seal, or no water flow to the filter at all. A small adapter like this one makes sure the join between the tap and the diverter is tight and reliable. It is a simple piece, but it is essential if you want hassle-free use from your benchtop water filter.
Appearance
A small round adapter with a 24mm male thread, finished in brass or chrome-plated brass, depending on stock. Compact enough to blend in with the faucet without getting in the way.
Pro Tip
When fitting the adapter, check that the washer inside the diverter valve is in place and in good condition. A fresh washer plus this adapter is the best way to prevent small leaks at the tap.
FAQs
1. How do I know if this adapter fits my tap?
Remove the aerator at the end of your faucet. If the thread is external (male) and measures 24mm across, this is the correct adapter.
2. What does this adapter connect to?
It connects your tap to the diverter valve supplied with most benchtop water filters.
3. Do I need tools for installation?
No. It screws on by hand. Just tighten it firmly so it sits flush and forms a good seal.
4. What if my tap is not 24mm?
This adapter only fits taps with a 24mm male thread. Other sizes are not supported.
5. Can I leave it on the tap permanently?
Yes. It is made from solid, corrosion-resistant brass that can handle daily use long-term.