Description
Overview
This 10 inch whole house chlorine filter system is built for homes that want cleaner water coming through every tap. It works by reducing sediment first, then removing chlorine as the water passes through the final carbon stage. The setup suits mains water supplies where chlorine smell, taste or fine particles are becoming noticeable. Once installed, it helps protect plumbing, fixtures and appliances while improving the water you use for drinking, cooking and showering. The kit comes unassembled, so you will need to put the housings and cartridges together before installation.
Key Features
-
Three stage filtration using sediment and carbon cartridges
-
Helps reduce chlorine, colour and general taste issues in household water
-
Large 10 inch by 4.5 inch cartridges for better flow
-
Strong polypropylene housings with 1 inch BSP ports
-
Opening handle included for tightening housings
-
Works with most standard whole house plumbing setups
-
Simple maintenance once installed
Where It’s Used
-
Homes on mains water with noticeable chlorine levels
-
Properties wanting whole house filtration rather than point of use units
-
Shower, kitchen, bathroom and laundry outlets
-
Small rentals and family homes needing a basic, reliable system
How to Install
-
Assemble the housings and cartridges before mounting
-
Ensure water is shut off and pressure fully drained
-
Fit the bracket and connect the inlet and outlet plumbing
-
Tighten housings using the supplied handle
-
Flush the system until the water runs clear
Compatibility
-
Fits standard 10 inch by 4.5 inch sediment and carbon cartridges
-
1 inch BSP connections suit common whole house manifolds
-
Suitable for mains pressure up to 90 PSI
Appearance
Dark grey housings with black caps, supplied with two cartridges and a handle.
If your water pressure is high or the plumbing is older, consider adding a pressure limiting valve to protect the housings from unexpected surges.
FAQs
1. What does this whole house system remove?
It reduces sediment first, then uses carbon filtration to remove chlorine, taste and odour issues. This gives cleaner water through all household taps.
2. Does it come fully assembled?
No. The housings and cartridges are supplied separately, so you will need to put them together before installation. The process is simple and the handle is included.
3. How often do the cartridges need replacing?
Most homes replace the cartridges every 6 to 12 months, depending on water quality and usage. A drop in flow or a return of chlorine smell usually means it is time.
4. Can I install this myself?
If you are confident with basic plumbing and can safely isolate your water supply, you may be able to install it. Otherwise, a plumber can put it in quickly.
5. Will this reduce water pressure?
Large 10 inch by 4.5 inch cartridges are designed for good flow, but there will still be a small pressure drop. In most homes it is barely noticeable.